quizas no me he explicado bien… Digo que una taba solo hecha con bambu no aguanta, se suelen fabricar con epoxi y fibra de vidrio o por ejemplo con las dos lamina del medio de madera normal y las demas de bambu
las loaded tan tiem segun la web: «Epoxy and Tri-axle fiberglass sandwich a vert-lam Bamboo core, pressed into concave and convex cambers as well as nose and tail kicks. The nose and tails are reinforced with an extra layer of fiberglass for added stiffness and strength without compromising the responsiveness and energy of the central camber. DropThru cutouts are CNC milled for precision. This is the most complex board we’ve built to date and we hope you will appreciate the subtle beauty of the form. «
Estan construidas con un sandwich de fibra, es decir, arriba y abajo
y las bhangras: «We are stoked to say this is our most organic board to date. We have created a durable beast from bamboo, cork and epoxy bio-resin. We used no fiberglass in this board but were able to get the strength and flex characteristics we wanted by using two cores of vert-lam bamboo with cork in the middle for weight reduction and dampening. The top of the board is a cross-ply of bamboo vert-lam to strengthen the board across the width, and we use a similar ply in the center (next to the cork) to stiffen up the flex 1 version. Many of the boards have small holes in the nose and or tail. These are caused by grooves in the bottom core that allow the board to bend into a deeper concave. They will not affect the performance or durability of the board and are a great place to store soup.»
Estan no llevas fibra de vidrio pero si bambu en en los dos sentidos de la beta, a lo largo y luego a lo ancho y con corcho
